Bambu Lab A1 Combo 10 Printer Set

Description

A1 Combo Print Examples

• Full-auto Calibration
• Multi-Color Printing
• Active Flow Rate Compensation
• 1-Clip Quick Swap Nozzle
• Active Motor Noise Cancelling
• 256*256*256 mm³ Build Volume
• Upgraded heatbed cable featuring Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving, and an extended strain relief.

A1 Combo Print Examples

FEATURES

Full Auto Flow Calibration & Active Flow Rate Compensation

The eddy current sensor in the toolhead monitors nozzle pressure to automatically calculate the flow calibration parameter. The Active Flow Rate Compensation algorithm can then utilize this updated parameter to accurately compensate the flow, ensuring smooth extrusion at every corner.

Comprehensive Filament Monitoring

Fully loaded with filament tangle and runout sensors, a nozzle pressure sensor, and two filament odometers, the A1 Combo actively monitors filament tangle, filament runout, and air printing problems.

Active Motor Noise Canceling

Silent mode and Active Motor Noise Canceling can quiet the printer down to under 48dB.

Load/Unload Filament With One Touch

No manual setting involved, A1 fully automated the filament load/unload process.

High-Speed Precision

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and an advanced motion control system bring users ultra-fine print quality and high print speed.

Quick Swap Nozzles

All-new quick swap hotend design, the hotend pops in and out with just one clip. No tool is needed.

Full-Auto Calibration

The A1 Combo handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance, and nozzle pressure for every print job, automatically.

Auto Bed-Level and Auto Z-Offset

A1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.

Auto Tune Both X & Y Resonance Before Every Print

A1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.

AMS lite

Multi-Color Printing For Everyone

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

• Active Flow Rate Compensation
  Print Smooth At Every Corner, Always

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

• High-speed Precision

Bed Slinger with CoreXY Speed And Quality

Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

• Intuitive UI

As Easy As Your Smart Phone

A1 now has a simplified touchscreen UI system that walks you through all the hurdles. You don’t have to be a 3D printing expert to use the A1.

• Worry-free Printing

Start And Relax

Bambu Lab printers are well known for the worry-free printing experience that has been widely praised by our fantastic userbase. Check out what our users have to say about our printers on the market!