Atmosphere Controlled Ovens – Dev https://dev.additiveplus.com Fri, 23 Aug 2024 02:28:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.5 https://dev.additiveplus.com/wp-content/uploads/cropped-AdditivePlus-Logo-Vertical-Dark-32x32.png Atmosphere Controlled Ovens – Dev https://dev.additiveplus.com 32 32 shopengine_activated_templates a:1:{s:6:"single";a:1:{s:4:"lang";a:1:{s:2:"en";a:1:{i:7;a:3:{s:11:"template_id";i:53939;s:6:"status";b:1;s:11:"category_id";s:3:"912";}}}}} CONTROLLED ATMOSPHERE OVEN – HTMA https://dev.additiveplus.com/product/controlled-atmosphere-oven-htma/ Sat, 17 Aug 2024 11:41:10 +0000 https://dev.additiveplus.com/?post_type=product&p=52294 The HTMA series is a range of modified atmosphere high temperature ovens for use with inert atmospheres up to 700°C.

The post CONTROLLED ATMOSPHERE OVEN – HTMA appeared first on Dev.

]]>

STANDARD FEATURES
• 400°C, 500°C, 600°C or 700°C operating temperatures
• 28, 95, 220, 500 & 1000 litre capacities
• Carbolite Gero 301 controller, with single ramp to set-point & process timer
• Rear mounted fan & side air guides give horizontal ‘airflow’
• Fully seam welded to contain modified atmosphere
• Manual gas control via needle valves & flowmeters (nickel brass)
• Corrosion resistant stainless steel interior with perforated non-tip shelves & runners
• Stainless steel pipe-work, nickel brass flow-meter & solenoid valves
• Single side hinged door, with metal heat seal & rubber gas tight seal, closed using non slam handle
• Hard wearing, zinc coated & stoved epoxy polyester coated exterior
• Gas inlet connection: bulkhead compression fitting to suit 10 mm outside diameter tube (maximum inlet pressure = 2 bar)
• Door switch

OPTIONS (SPECIFY THESE AT TIME OF ORDER)
• A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications – more information
• Automatic gas control (requires a EPC3016P1, CC-T1, EPC3008P10 or Nanodac series programmable controller)
• Stainless steel flow-meter & solenoid valves, instead of nickel brass
• Fixed or castor mounted floor stands
• Flow failure alarm
• Oxygen sensor fitted to gas outlet to monitor oxygen level, displayed as ppm (parts per million) or percentage. Only available for use with nanodac instruments

llimagecaptionhtma-6-28
HTMA 6/28 with 3508P1 programmer and automatic gas control options
llimagecaptionhtma-6-220
HTMA 6/220 with nanodac programmer, automatic gas control and oxygen monitoring options

HTMA 4/28

Max temp (°C)400
Volume (litres)28

HTMA 4/95

Max temp (°C)400
Volume (litres)95

HTMA 4/220

Max temp (°C)400
Volume (litres)220

HTMA 4/500

Max temp (°C)400
Volume (litres)500

HTMA 4/1000

Max temp (°C)400
Volume (litres)1000

HTMA 5/28

Max temp (°C)500
Volume (litres)28

HTMA 5/95

Max temp (°C)500
Volume (litres)95

HTMA 5/220

Max temp (°C)500
Volume (litres)220

HTMA 5/500

Max temp (°C)500
Volume (litres)500

HTMA 5/1000

Max temp (°C)500
Volume (litres)1000

HTMA 6/28

Max temp (°C)600
Volume (litres)28

HTMA 6/95

Max temp (°C)600
Volume (litres)95

HTMA 6/220

Max temp (°C)600
Volume (litres)220

HTMA 6/500

Max temp (°C)600
Volume (litres)500

HTMA 6/1000

Max temp (°C)600
Volume (litres)1000

HTMA 7/28

Max temp (°C)700
Volume (litres)28

HTMA 7/95

Max temp (°C)700
Volume (litres)95

HTMA 7/220

Max temp (°C)700
Volume (litres)220

The post CONTROLLED ATMOSPHERE OVEN – HTMA appeared first on Dev.

]]>