Other Accessories and Spare Parts – Dev

Polymaker PolyBox Edition Ⅱ

Ashkhen — Fri, 28 Feb 2025 12:05:41 +0000

FEATURES

The Polymaker PolyBox Edition II is a high-quality 3D printer filament dry box designed to provide the ideal storage environment for your 3D printing filaments. It’s compatible with all 3D printers and helps protect your materials from moisture, ensuring consistent and high-quality prints every time.

Key features include:

Holds two 1kg spools or one 3kg spool, making it versatile for different filament sizes
Optimum environment for filament storage, preventing moisture-related issues like warping or poor adhesion
Compatible with all 3D printers, making it a universal solution for filament care
Filament drying function to maintain the filament’s optimal condition for precision printing

With the PolyBox Edition II, you can trust that your filament is stored properly, ready for perfect 3D print results. Keep your materials dry and your prints flawless, no matter the filament type.

PolyboxTM includes a built-in high-precision hygrometer and silica gel desiccant sachets to control and absorb moisture from the air. The humidity within the box is maintained below 15% to prevent the filament from absorbing moisture during the storage and even during the 3d printing process. It is specifically designed for Nylon, PVA, PolySmoothTM and other highly hygroscopic 3D printing materials.
However, its good practise to keep all 3D printing filaments inside the PolyBoxTM to preserve the optimum printing quality.
PolyBoxTM is compatible with both 1.75mm and 2.85mm filaments and can contain up to two 1kg spools or one 3kg spool!

To install the hygrometer battery
Slide down the hygrometer attery cover.
Remove the battery from the package, insert it in the designed compartment and put back the cover.
Check if the front display switches on. When you notice that the hygrometer display is fading, replace the button battery 1.5V LR44.
Note: The provided battery will last approximately 3 months.

To install the rods
Slide two bearings onto both ends of the steal rod, then snap the rod and bearings into the PolyBoxTM

To install the desiccant sachets
Remove the set of desiccants from the package and check if the sealed bag is intact.
If there are any leaks, please dry the sachets before using it. The provided desiccant bags can be dried in a microwave for 4 times 5min (defrost mode), make sure to flip the bags upside down between each iteration. Use oven mitts to touch the desiccant bags.
Note: other types of desiccant may not have the ability to recover and be reused.
Do not expose the desiccant sachets to the air for too long. We highly recommend silica gel for the type of desiccant.
Put the two desiccant bags into the PolyBox™, one in each compartment.
Close the two compartments with the two grids.

To install the filament guide
Cut the filament guide according to your need (Distance from the PolyBoxTM to the 3D printer) and insert it in the rubber holes on the back or on the top.

To place the spool

Place the spool in the PolyBoxTM and feed the filament through the rubber plug.
Note: Make sure the material is fully dried before putting it in the PolyBoxTM.
Place the cover on the PolyBoxTM.
You should feel a small friction which ensures the fit. Make sure the cover fits correctly in the base to ensure an airtight environment for the spools. Do not open the PolyBoxTM too frequently and close all the unused rubber plugs to preserve the desiccant.
Gently pull the filament out to check if the spool rolls smoothly.
After 2 hours you should see the inside humidity dropping below 15%. The time will depend on the room humidity. The hygrometer
should always display a humidity level below 15%.
Note : The minimum humidity level that can be displayed is 10%
If the hygrometer displays a humidity level above 20%, replace the desiccant.

The post Polymaker PolyBox Edition Ⅱ appeared first on Dev.

UltiMaker PVA Removal Station

Ashkhen — Fri, 28 Feb 2025 10:33:11 +0000

FEATURES

The UltiMaker PVA Removal Station is the ultimate 3D printing support removal tool, designed to make dissolving PVA supports faster and easier. This precision-engineered solution allows you to produce complex parts and stunning prototypes more efficiently by removing support material in a matter of hours.

Key features include:

Rinsing basket dimensions of 200 x 230 x 165 mm, perfect for a variety of print sizes
Rotor-powered water circulation with adjustable speed settings, ensuring effective and consistent PVA removal
Minimal maintenance required, making it easy to use and maintain
Up to 4x faster removal of PVA compared to traditional soaking in motionless water
With the UltiMaker PVA Removal Station, you can streamline your 3D printing workflow, achieving faster design iterations with minimal operator time. It’s an essential tool for anyone looking to improve efficiency and accuracy in their post-processing.

Simple post-processing. Faster Shrink your post-processing time

High-speed water circulation driven by a magnetic rotor removes PVA up to four times faster than motionless water, even from hard-to-reach cavities. So you have your parts post-processed and ready to use as soon as possible.

Reduce operator time up to 80%

The UltiMaker PVA Removal Station requires only a few minutes of operator time per print, with minimal maintenance needs. Just press the start button, leave it to do its job, and collect your print when it’s ready.

Compared with dissolving PVA in motionless water in an improvised container

Rotor-powered water circulation

Choose 100 or 225 RPM circulation depending on the fragility of your part. Every two minutes, the rotor changes direction to push water evenly against the model.

Prints stay safe and submerged

A rinsing basket keeps your print in place and completely submerged while dissolving, then lifts up for mess-free draining and print removal.

Easy to monitor progress

A transparent, illuminated container lets you easily follow the PVA removal process and see when your part is ready. Plus, a saturation indicator shows when to refresh the water.

The post UltiMaker PVA Removal Station appeared first on Dev.

UltiMaker S3/S5 Printhead Assembly

Ashkhen — Fri, 28 Feb 2025 10:23:28 +0000

FEATURES

Restore your UltiMaker S3/S5’s performance with the UltiMaker S3/S5 Printhead Assembly. This high-quality 3D print head assembly includes all the essential components for optimal functionality, ensuring reliable prints and minimal downtime.

The assembly includes:

Printhead cable for seamless connectivity
PCB (Printed Circuit Board) for precise control
Fans for efficient cooling and consistent print quality
Nozzle seal for leak prevention and optimal extrusion

Designed for easy replacement, this 3D printer head assembly ensures your 3D printer operates at its best. Whether you’re performing maintenance or replacing a worn-out part, the UltiMaker S3/S5 Printhead Assembly is the perfect solution for a hassle-free 3D printing experience.

The post UltiMaker S3/S5 Printhead Assembly appeared first on Dev.

Formlabs Fuse 1 Build Chamber

Ashkhen — Fri, 28 Feb 2025 10:03:10 +0000

FEATURES

The Formlabs Fuse 1 Build Chamber is engineered to maximize throughput, reducing downtime between prints and optimizing your production workflow. This high-performance 3D printer chamber is perfect for users seeking continuous printing with minimal waiting time.

Key features include:

Removable Build Chamber that enables seamless print transitions
Additional Powder Cartridges for continuous printing without interruption
Industry-leading cooldown times, allowing new prints to start just 1-2 hours after the previous one finishes
Designed for use with Formlabs Fuse 1 to ensure precision and consistency in prints
Whether you’re working with large-scale production or small batches, the Fuse 1 Build Chamber ensures efficiency, faster turnaround, and reduced downtime. It’s the perfect solution for those who need to keep their 3D printer running smoothly and consistently.

The post Formlabs Fuse 1 Build Chamber appeared first on Dev.

3DVerkstan 0.8mm Ruby Nozzle 1.75 Filament

Ashkhen — Fri, 28 Feb 2025 09:03:50 +0000

Experience superior performance with the 3DVerkstan 0.8mm Ruby Nozzle, designed for 1.75mm filament. This premium 3D printing nozzle features a ruby tip, providing exceptional durability and precision, ideal for achieving consistent and high-quality 3D prints.

The Olsson Ruby Nozzle is perfect for high-end 3D printing applications, offering:

0.8mm nozzle diameter for faster printing and larger extrusion flows
Compatibility with 1.75mm filament, providing excellent print results with a variety of materials
Ruby tip for extended wear resistance and precision, ensuring your nozzle stays sharp for longer

Available in multiple versions for both 1.75mm and 2.85mm filament, giving you flexible options for various printing needs
This 3D printing nozzle is an essential tool for users who demand reliability and accuracy in their prints. Whether you’re upgrading your 3D printer or replacing a worn-out nozzle, the 3DVerkstan Ruby Nozzle delivers exceptional results with every print.

ONE NOZZLE

The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials successfully tested so far.

HIGHLY WEAR RESISTANT

The ruby mounted at the tip assures that even the toughest materials will be printable. It was originally designed for printing with a composite of Boron Carbide (B4C), the third hardest known material in the world.

EXCELLENT HEAT CONDUCTIVITY

Since most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.

VERIFIED PERFORMANCE

People all over the world have been testing different iterations of the ruby nozzle since early 2016. We are very happy to hear about the good results from this community. You can see some of these testimonials and contribute your own here.

The post 3DVerkstan 0.8mm Ruby Nozzle 1.75 Filament appeared first on Dev.

Formlabs Finishing Tools

Ashkhen — Fri, 28 Feb 2025 08:46:40 +0000

FEATURES

Maximize the full potential of your Formlabs SLA printer with the Formlabs Finishing Tools Kit, the best 3D printing tool kit for post-processing. Designed to reduce the time and effort required to finish your parts, this 3D print tool kit provides everything you need for a smooth and polished result.

This comprehensive 3D printing tools kit makes it easier than ever to achieve high-quality post-processed parts. Whether you’re a professional or a hobbyist, the Formlabs Finishing Tools Kit is an essential addition to your setup, offering everything you need for the perfect finish on every SLA print.

Curated by experienced engineers and validated by customers, these 3D printing finishing tools were designed to enhance surface finish, smooth planes and edges, and elevate overall appearance while driving down labor time and cost per part.

Bring SLA parts to the next level with Formlabs Finishing Tools

Ergonomic Pen Sander: Creates a uniform surface finish on flat and gently curved parts
Rotary Tool: Removes support marks and enlarges holes
Rotary Tool Bit Kit:
- Grinding + Polishing Bits (16 pieces): Grind down, sand, and polish parts
- Buffing Bits (12 pieces): Create a uniform finish after grinding or sanding
Flush Cutters: Removes support tips
Hobby Knife and Blades: Precisely removes individual support tips
Spray Bottle: Dispenses IPA or water to remove dust, or mineral oil to polish surfaces
Microfiber Cloth: Cleans dust from sanded or polished parts
Large Silicone Mat (16 x 24 in / 40 x 60 cm): Protects work surfaces throughout the finishing process

The post Formlabs Finishing Tools appeared first on Dev.

SOLUTION BOXES

Alena Kalininskaya — Sun, 08 Sep 2024 21:57:00 +0000

QPREP Solution Boxes include:

• A guide for the preparation of the selected material
• Consumables for grinding as well as polishing: Grinding disc, grinding paper, Diamond suspension and polishing cloth

Product Advantages

• Evaluated preparation guide
• Consumables for preparation available in sufficient quantity
• Simple instructions for laboratory workers

Recommended applications

• For unknown specimen preparation
• Ideally suited for new customers as an introduction
• 11 different boxes for different materials are available for media in Ø250 mm and Ø300 mm.

The post SOLUTION BOXES appeared first on Dev.

Teflon-lined Dispensing Tips

Ashkhen — Thu, 22 Aug 2024 12:34:05 +0000

Teflon® dispensing tips are designed for enhanced flow and will work great with multi-phase pastes or materials containing solid particles. Internal lining prevents clogging and ensures consistent extrusion.
Lower diameters can be used for low-viscosity materials.
For ease of use, different diameters are color-coded.
Material: Polypropylene, Stainless steel, Teflon.
Size (Length): 25.4 mm / 1.0 in.
Dispensing tips are sold in packs of 20.

The post Teflon-lined Dispensing Tips appeared first on Dev.

Stainless Dispensing Tips

Ashkhen — Thu, 22 Aug 2024 12:21:30 +0000

The stainless steel dispensing tips are free of riddles and free of silicones and chlorides. They are perfect for sterile applications and at lower diameters
– for low-viscosity fluid extrusion. They have an electropolished cannula to ensure accurate and consistent flow. For ease of use, different diameters
are color-coded.
Material: Polypropylene, Stainless Steel.
Size (Length): 25.4 mm / 1.00 in.
Dispensing tips are sold in packs of 10.

The post Stainless Dispensing Tips appeared first on Dev.