Accessories – Dev

Polymaker PolyBox Edition Ⅱ

Ashkhen — Fri, 28 Feb 2025 12:05:41 +0000

FEATURES

The Polymaker PolyBox Edition II is a high-quality 3D printer filament dry box designed to provide the ideal storage environment for your 3D printing filaments. It’s compatible with all 3D printers and helps protect your materials from moisture, ensuring consistent and high-quality prints every time.

Key features include:

Holds two 1kg spools or one 3kg spool, making it versatile for different filament sizes
Optimum environment for filament storage, preventing moisture-related issues like warping or poor adhesion
Compatible with all 3D printers, making it a universal solution for filament care
Filament drying function to maintain the filament’s optimal condition for precision printing

With the PolyBox Edition II, you can trust that your filament is stored properly, ready for perfect 3D print results. Keep your materials dry and your prints flawless, no matter the filament type.

PolyboxTM includes a built-in high-precision hygrometer and silica gel desiccant sachets to control and absorb moisture from the air. The humidity within the box is maintained below 15% to prevent the filament from absorbing moisture during the storage and even during the 3d printing process. It is specifically designed for Nylon, PVA, PolySmoothTM and other highly hygroscopic 3D printing materials.
However, its good practise to keep all 3D printing filaments inside the PolyBoxTM to preserve the optimum printing quality.
PolyBoxTM is compatible with both 1.75mm and 2.85mm filaments and can contain up to two 1kg spools or one 3kg spool!

To install the hygrometer battery
Slide down the hygrometer attery cover.
Remove the battery from the package, insert it in the designed compartment and put back the cover.
Check if the front display switches on. When you notice that the hygrometer display is fading, replace the button battery 1.5V LR44.
Note: The provided battery will last approximately 3 months.

To install the rods
Slide two bearings onto both ends of the steal rod, then snap the rod and bearings into the PolyBoxTM

To install the desiccant sachets
Remove the set of desiccants from the package and check if the sealed bag is intact.
If there are any leaks, please dry the sachets before using it. The provided desiccant bags can be dried in a microwave for 4 times 5min (defrost mode), make sure to flip the bags upside down between each iteration. Use oven mitts to touch the desiccant bags.
Note: other types of desiccant may not have the ability to recover and be reused.
Do not expose the desiccant sachets to the air for too long. We highly recommend silica gel for the type of desiccant.
Put the two desiccant bags into the PolyBox™, one in each compartment.
Close the two compartments with the two grids.

To install the filament guide
Cut the filament guide according to your need (Distance from the PolyBoxTM to the 3D printer) and insert it in the rubber holes on the back or on the top.

To place the spool

Place the spool in the PolyBoxTM and feed the filament through the rubber plug.
Note: Make sure the material is fully dried before putting it in the PolyBoxTM.
Place the cover on the PolyBoxTM.
You should feel a small friction which ensures the fit. Make sure the cover fits correctly in the base to ensure an airtight environment for the spools. Do not open the PolyBoxTM too frequently and close all the unused rubber plugs to preserve the desiccant.
Gently pull the filament out to check if the spool rolls smoothly.
After 2 hours you should see the inside humidity dropping below 15%. The time will depend on the room humidity. The hygrometer
should always display a humidity level below 15%.
Note : The minimum humidity level that can be displayed is 10%
If the hygrometer displays a humidity level above 20%, replace the desiccant.

The post Polymaker PolyBox Edition Ⅱ appeared first on Dev.

UltiMaker S3/S5 Printhead Assembly

Ashkhen — Fri, 28 Feb 2025 10:23:28 +0000

FEATURES

Restore your UltiMaker S3/S5’s performance with the UltiMaker S3/S5 Printhead Assembly. This high-quality 3D print head assembly includes all the essential components for optimal functionality, ensuring reliable prints and minimal downtime.

The assembly includes:

Printhead cable for seamless connectivity
PCB (Printed Circuit Board) for precise control
Fans for efficient cooling and consistent print quality
Nozzle seal for leak prevention and optimal extrusion

Designed for easy replacement, this 3D printer head assembly ensures your 3D printer operates at its best. Whether you’re performing maintenance or replacing a worn-out part, the UltiMaker S3/S5 Printhead Assembly is the perfect solution for a hassle-free 3D printing experience.

The post UltiMaker S3/S5 Printhead Assembly appeared first on Dev.

Formlabs Finishing Tools

Ashkhen — Fri, 28 Feb 2025 08:46:40 +0000

FEATURES

Maximize the full potential of your Formlabs SLA printer with the Formlabs Finishing Tools Kit, the best 3D printing tool kit for post-processing. Designed to reduce the time and effort required to finish your parts, this 3D print tool kit provides everything you need for a smooth and polished result.

This comprehensive 3D printing tools kit makes it easier than ever to achieve high-quality post-processed parts. Whether you’re a professional or a hobbyist, the Formlabs Finishing Tools Kit is an essential addition to your setup, offering everything you need for the perfect finish on every SLA print.

Curated by experienced engineers and validated by customers, these 3D printing finishing tools were designed to enhance surface finish, smooth planes and edges, and elevate overall appearance while driving down labor time and cost per part.

Bring SLA parts to the next level with Formlabs Finishing Tools

Ergonomic Pen Sander: Creates a uniform surface finish on flat and gently curved parts
Rotary Tool: Removes support marks and enlarges holes
Rotary Tool Bit Kit:
- Grinding + Polishing Bits (16 pieces): Grind down, sand, and polish parts
- Buffing Bits (12 pieces): Create a uniform finish after grinding or sanding
Flush Cutters: Removes support tips
Hobby Knife and Blades: Precisely removes individual support tips
Spray Bottle: Dispenses IPA or water to remove dust, or mineral oil to polish surfaces
Microfiber Cloth: Cleans dust from sanded or polished parts
Large Silicone Mat (16 x 24 in / 40 x 60 cm): Protects work surfaces throughout the finishing process

The post Formlabs Finishing Tools appeared first on Dev.

Heat Module

Ashkhen — Thu, 22 Aug 2024 09:59:59 +0000

Heated head module with the possibility of heating the 10ml cartridge to 60℃. It allows you to upgrade the machine yourself from version B to version C.

The post Heat Module appeared first on Dev.

UV Module

Ashkhen — Thu, 22 Aug 2024 09:59:02 +0000

UV module with 365nm and 405nm wavelengths with post-processor controlled diodes. It allows you to upgrade the machine yourself from version A to version B.

The post UV Module appeared first on Dev.

Replacement Shelf Kit

Ashkhen — Mon, 22 Jul 2024 12:30:56 +0000

The post Replacement Shelf Kit appeared first on Dev.

LE seals Kit

Ashkhen — Mon, 22 Jul 2024 12:30:56 +0000

The post LE seals Kit appeared first on Dev.

Preventative Maintenance Kit for XiP Pro

Ashkhen — Mon, 22 Jul 2024 12:30:55 +0000

The post Preventative Maintenance Kit for XiP Pro appeared first on Dev.

LSPc Sample Kit from NextFactory

Ashkhen — Mon, 22 Jul 2024 12:30:52 +0000

xMODEL15-Gray

BIKE PEDAL

This bike pedal highlights the crisp detail, high-quality surface finish, and superb resolution achievable for prototyping with xMODEL15 resin. This economical modeling material is known for its quick print speeds and excellent first time print success.

Printer: XiP Pro
Print Time (H:M): 3:58
Parts/Build: 6
Print Time/Part (M:S): 39:40

xMODEL17-Clear

FLUID FLOW DEVICE

This fluid flow device showcases the transparent and translucent finishes users can achieve when they use xMODEL17-clear, Nexa3D’s special formulation for exceptional clarity, offering precision in every detail and elevating product aesthetics.

Printer: XiP
Print Time (H:M): 3:08
Parts/Build: 6
Print Time/Part (M:S): 30:10

xCERAMIC3280

NEXA X POKER CHIP MOLD

This poker chip mold demonstrates the fantastic feature resolution achievable with xCERAMIC3280 for one of its most popular applications—injection molding. This reusable tool exhibits low coefficient of thermal expansion and a smooth surface finish perfect for molding.

Printer: XiP Pro
Print Time (H:M): 1:37
Parts/Build: 20
Print Time/Part (M:S): 4:51

xMOLD

IMPELLER MOLD

Functional prototyping is now free from material constraints with xMOLD. This versatile resin enables injection molding with 1000s of different feedstocks from polymers and composites to ceramics and metal. Produce highly complex parts and dissolve the mold away.

Printer: XiP
Print Time (H:M): 0:28
Parts/Build: 8
Print Time/Part (M:S): 07:00

xFLEX402-Black

LATTICE CUBE

This flexible polyurethane-based material has a firmer shore 76A durometer, high elongation at break, and excellent tensile strength, ideal for prototyping applications of elastomeric components and production parts. Test it against xFLEX475-White and feel the difference.

Printer: XiP Pro
Print Time (H:M): 2:05
Parts/Build: 8
Print Time/Part (M:S): 15:37

xFLEX475-White

NEXA X POKER CHIP MOLD

This flexible polyurethane-based material has a very soft shore 55A durometer, high elongation at break, and excellent tensile strength, ideal for functional prototyping applications of elastomeric components. Test it against xFLEX402-Black and feel the difference.

Printer: XiP Pro
Print Time (H:M): 0:57
Parts/Build: 8
Print Time/Part (M:S): 7:07

xPP405-Black

BUCKLE AND CLIP

Printer: XiP
Print Time (H:M): 0:28
Parts/Build: 8
Print Time/Part (M:S): 07:00

xABS3843

BRAKE LEVER

Printer: XiP Pro
Print Time (H:M): 2:05
Parts/Build: 8
Print Time/Part (M:S): 15:37

xPRO9400-FR

ELECTRICAL CONNECTOR

A flame-retardant resin formulated to deliver accuracy, repeatability, and UL94 V-0 rated performance with walls down to 2mm thickness. With its elevated HDT, xPRO9400-FR is perfect for prototyping and producing high-requirement components for automotive, aerospace, and industrial manufacturing applications.

Printer: XiP
Print Time (H:M): 1:37
Parts/Build: 24
Print Time/Part (M:S): 4:02

xPRO1100-Black

POLE HANDLE

This pole handle highlights the crisp detail, high-quality surface finish, and superb resolution achievable for prototyping with xPRO1100-Black resin. Known for its quick print speeds and excellent first-time print success.

Printer: XiP Pro
Print Time (H:M): 5:59
Parts/Build: 2
Print Time/Part (H:M): 2:59

PRO9499-White

TRICERATOPS SKULL MODEL

Turn to PRO9499-White when modeling detailed parts that require smooth surface finishes and superb resolution. This economical modeling material is known for its quick print speeds and excellent first-time print success.

Printer: XiP
Print Time (H:M): 2:07
Parts/Build: 3
Print Time/Part (M:S): 42:20

xPEEK147

BOTTLE BLOW MOLD

Blow molding is a highly popular application for xPEEK147. This stiff, heat-resistant material has a HDT of 230°C, similar to many PAEK thermoplastics like PEEK. For prototypes and end-use parts subjected to high temps.

Printer: XiP Pro
Print Time (H:M): 7:35
Parts/Build: 8
Print Time/Part (M:S): 56:52

The post LSPc Sample Kit from NextFactory appeared first on Dev.